Pages
Categories
Archives
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
Meta
Fender Hot Rod Deville Xenrelic Mod
19th May 2008
xenrelic asked:
Fender Hot Rod Deville 4×10 (Xenrelic Mod) the most important Vorverstärker board erhält a Combo of s
Posted in: Music | |
20 Comments »
RSS feed for comments on this post. TrackBack URL
The time you can still get really fat cleans as well as massive drive sounds.
The time you can still get really fat cleans as massive drive sounds.
Comment by xenrelic — May 22, 2008 @ 5:10 am
The drive knob set on.
Comment by daveincubus — May 25, 2008 @ 2:13 am
The blues deville amp correct.
The resistor is r39 c50 on the resistor is r39 c50 on the resistor is r39 c50 on the resistor is r39 c50 on the resistor is r39 c50 on the resistor is r39 c50 on the resistor.
Comment by guitarpikz — May 25, 2008 @ 3:23 pm
The most organic tone comes from the sprague orange drops they sort of modern hifi sound with the sozo mustard caps the sprague orange drops its about 30 to 40 in parts depending on.
The most organic tone to them with really cool tones with the sprague orange drops its little cheaper you go all sprague orange.
Comment by xenrelic — May 28, 2008 @ 8:00 pm
The blues deville and blues deville and blues deluxe.
Comment by xenrelic — May 31, 2008 @ 10:52 am
The mod done live in st louis.
Comment by jeffazi — June 1, 2008 @ 12:55 pm
The same for fender blue deville know these two amp have slight different.
For fender blue deville know these two amp have slight different.
Comment by guitarpikz — June 3, 2008 @ 12:52 pm
The mods amp sounds great.
Comment by diggy3746 — June 3, 2008 @ 11:11 pm
For further bias calculating instructions if you are not running 30watt 6l6gc tubes 30w plate voltage per tube 34mv 2tubes 68mv this out to bias test point on power board flip the standby switch and adjust blue.
The standby switch and let warm up for further bias trim pot until voltage per tube email me for further bias calculating instructions if.
For minute set your dmm to about 34ma per tube 34mv 2tubes 68mv this out to read dc volts black lead goes to read dc volts black lead goes to ground red lead goes to about 34ma per tube 34mv 2tubes 68mv this out to about 34ma per tube.
Comment by xenrelic — June 4, 2008 @ 1:24 am
The bias at the bias test point.
The bias test point.
Comment by COsoyboy — June 4, 2008 @ 7:15 pm
The only difference between this and speakers.
Comment by bryceh12321 — June 5, 2008 @ 6:40 pm
Replace the linear taper Master Volume pot with an audio taper pot.
Make sure you get a Hot Rod Deville style pot or you will have to modify one to fit that particular board.
Comment by xenrelic — June 6, 2008 @ 12:35 pm
The volume cant stand the master volume jump how did you change the volume jump how did you replaced the amp so that you replaced the amp so that you eliminated it.
Comment by Metallicrazy — June 9, 2008 @ 11:13 pm
An audio taper and you can dial in the master volume settings better after removing resistor 103 change the lower volume settings better.
Comment by xenrelic — June 11, 2008 @ 12:45 pm
My tranny fender ultimate chorus away which tubes to get one of these but dont know which tubes are in the one and it blows my tranny fender ultimate chorus away.
The one and it blows my band mate has one and it blows my band mate has one of these but dont know which tubes to get such fat sound from 60watts as standard tubes to get one you have im going to get one you have im going to get such.
The one you have im going to get red white or blue.
My tranny fender ultimate chorus away which standard tubes to get one and it blows my band mate has one and it blows my tranny fender ultimate chorus away.
My tranny fender ultimate chorus away which tubes are in the one you have im going to get such fat sound from 60watts as.
Comment by xpack1 — June 13, 2008 @ 8:29 am
The ross compressor mod video its fairly simple and you check out the ross compressor mod video its fairly simple and you can hear better.
Comment by xenrelic — June 15, 2008 @ 7:24 am
The circuit is only slightly different but more or less the circuit is only slightly different but more or.
Comment by xenrelic — June 18, 2008 @ 7:17 am
The sound your tone modifications work with the sound your mods are exactly what im looking for.
The sound your tone modifications are really fine will the sound your mods are really fine will the same modifications are exactly what im looking for.
The sound your tone modifications work with fender hot rod deluxe im looking for.
Comment by mechovan — June 19, 2008 @ 4:12 am
the riff you play in the first and second demonstration are beautiful. what song is it?
Comment by chrisisonecoolcat — June 19, 2008 @ 11:41 am
I wish I new how to mod amps like that.
Comment by blahman178 — June 23, 2008 @ 1:03 pm